This reverse parking sensor system uses a radar system to assist you when parking. A high-speed microcomputer manipulates the signals from 2 ultrasonic detectors to work out precisely how far an obstacle is from your car. This system has an audible signal to inform you of your current position. It will increase in beep rate to inform you how close you are. As the buzzer is small this can be hidden and not seen, and can be placed in any position you want.
Parking Sensors are a modern supervisory system. They check and inform the driver of the distance behind and in front of the vehicle during parking procedures and warn acoustically against distances, which are determined through the device. A parking sensor provides assistance when parking and does not relieve the driver of the attention required. The kit consists of 2 ultrasonic sensors and one Control Box with a plug in buzzer.
Included in this kit are the following items
• 1 x Buzzer
• 1 x Control box
• 2 x Ultrasonic sensors
• 1 x Wiring kit
• 1 x User manual
The Reverse Parking system contains everything you need for a quick and successful installation:
How easy is it to fit?
The system is pre-wired and ready to plug together. The systems require just two connections to the vehicle
• (1) Reversing light
• (2) Earth
Do I need to drill any holes in my car?
No, as this system uses stick on sensors
Techincal Data
• Power Range : 10-15DC
• Maximum Power : 4W (Max)
• Operating Temprature : -40 degrees to +80 degrees
• Detecting Range : 0 metres to 1.8 metres
• Sensors must be between 0.5m and 0.65m from ground level
• Ultrasonic Frequency : 40 KHz
To pay by card click Buy Now or call us now on: +44 (0)1522 595858